2.2lbs Made in The USA USA 3D Filament Light Grey HTPLA 3D Printer Filament 1.75mm 1kg

Extrusion Temperatures: 235c +/- 10c 。 Temperature PLA Resin - no deformation up to 125c (250f) 。 IZOD Impact Strength (notched) @ 40 Newtons!! 。 Easy Annealable Process to increase Heat Deflection Temperature (HDT) 。 Tensile Strength @ over 6,000psi 。 At s we use all American 3D printer filament manufacturers and injection molders to make everything you see here; from the 3D printer filament to the raw plastic spool. 。 HTPLA (High Temperature PLA) is stronger than ABS, PETG, Co-Polyester Blends and even most Nylons - our HTPLA stands up to the sanitizing heat of a dishwasher with no deformation - and yet, still prints just like a normal PLA 3D Filament no special equipment or nozzle temperatures needed. 。Our HTPLA is made from trademarked NatureWorks Ingeo brand PLA and is 00% pure with NO harmful additives. 。 What makes our HTPLA (high temperature / high performance PLA) better: Sealed inside a re-usable zip-top vacuum bag, easy to store & use when you are ready。FDA Compliant for Food Contact。 New High Temperature PLA Resin - no deformation up to 5c (50f)。 Easy Annealable Process to increase Heat Deflection Temperature (HDT)。 Tensile Strength over 6,000psi。 IZOD Impact Strength (notched) 40 Newtons!!。。。 HTPLA Specifications: 。 Extrusion Temperatures: 35c +/- 0c。 Bed Temperature: Not needed, but if your 3D printer has heated bed 40c-60c works great。 Spool Diameter: 7.94" - Spool Width: .50" - Spool Hub Hole Diameter: .5"。 kg spool。 Dimensional Accuracy: 0.03mm。 HTPLA Density: .3 g/cm。 Volume: 0.85 L。 Length: 335 m (+/- 5%)。。。。