Double Ferrule Fitting Stainless Steel SS316 Material 3/4OD 19.05MM OD 90 Degree Union Elbow

90 Degree Union Elbow, Stainless Steel SS316 Material, 3/4'OD (19.05MM OD), Double Ferrule Fitting: Industrial & Scientific. Buy 90 Degree Union Elbow, Stainless Steel SS316 Material, 3/4"OD (19.05MM OD), Double Ferrule Fitting: Elbow Fittings - ✓ FREE DELIVERY possible on eligible purchases. Twin ferrule fitting for high pressure application 。 90 degree design for changing pipeline direction at 90 degree 。 Made of Stainless Steel 316 material for better corrosion resistance 。 Compression end connection at both ends 。 Twin ferrule fitting for assembly with tubing 。 The AL-1-SSA is a stainless steel 90 degree elbow twin ferrule compression fitting. 90 degree elbow is an elbow type fitting that connects between tubes to allow a change of direction at 90 degree. It come with both end compression type connection. It can be assembly by tighten the nut, front ferrule and back ferrule on tubing to the fitting body.。The working pressure is depend on the tube OD and thickness. The higher tubing outer diameter, the lower working pressure it can withstand. The thicker the thickness, the higher working pressure it can withstand.。Below is standard installation instruction for double ferrule fitting:Insert the tubing the fitting until it bottoms the fitting shoulder and hand-tighten the nut。The nut need to be tighten until the tubing does not move axially nor turn by hand。Mark the nut at 1 o'clock position and wrench-tighten the nut 1 1/4 turn to the o'clock position while holding the fitting body with a second wrench.。For fittings size that smaller than 1/4"OD or 6MM OD, the nut need to be tighten /4" turn to 9 o'clock position.。。。。